ø 35 mm - Rohde AG | Aluminum, stainless steel and plastic handles

Tube Connector for ø35 mm

Tube Connectors RV

Material:
Chill casting of high-grade aluminium alloy in accordance with DIN 1725.

Supply range:
The tube connectors are supplied with bolts and sockets nuts of stainless steel (material no. 1.4301).

Special versions:
Other diameters on request.

Colour/surface Surface-code
Rough state * -0.0
Barrel polished * -1.0
High-gloss polished * -1.1
Vibratory ground, dull finished
and technically anodized
* -2.0
Polished and anodized * -2.1
Powder-coatings * -3-RAL…

Variants

Angle connector 90°, 2-shell

Technical drawing of a 90 degree two-layer elbow connector showing three views with dimensions including diameters and lengths.
Bestell-Nr.: RV-1711a Request

Angle connector 90°, 2-shell

Metallic 90-degree elbow tube connector with three screws and two hollow cylindrical ends
Bestell-Nr.: RV-1888a Request

Angle connector 45° / 135°, 2-shell

Bestell-Nr.: RV-2370a Request

Angle connector 30° / 150°, 1-shell

Technical drawing of a 30 degree angled single-layer tube connector with dimensions in three views
Bestell-Nr.: RV-2380a Request

Angle joint connector, 1-shell

Bestell-Nr.: RV-1924c Request

Centre prop, 1-shell

Metal tube connector with a cylindrical opening and rectangular base with two mounting holes
Detailed technical drawing of a one-layer Mittelstütze tube connector showing front, side, and top views with dimensions including a 35 mm tube diameter and mounting hole sizes.
Bestell-Nr.: RV-2391a Request

Centre prop, 1-shell

Single-shell tube connector with vertical cylindrical holder and rectangular base with mounting holes
Bestell-Nr.: RV-2401a Request

Connection piece open, 1-shell

Bestell-Nr.: RV-2410a Request

Connection piece closed, 1-shell

Bestell-Nr.: RV-2411a Request

Tube connector piece, 1-shell

Bestell-Nr.: RV-2305 Request

Corner connector, open, 2-shell

Metallic open corner tube connector with two visible screws, designed for joining three tubes at right angles
Bestell-Nr.: RV-2340a Request

Corner connector, Headpiece, 2-shell

Metal corner tube connector head piece with two cylindrical openings and screws
Bestell-Nr.: RV-2340b Request

Corner connector 45° / 135°, 2-shell

Bestell-Nr.: RV-2345a Request

Cross-joint connector, 1-shell

Single-piece metal tube connector with two perpendicular circular openings and a tightening screw
Technical drawing of a single-shell cross tube connector with three orthographic views and dimensions indicating 35 mm diameter and 87 mm length.
Bestell-Nr.: RV-2086b Request

Cross-joint connector, 2-shell

Bestell-Nr.: RV-2330a Request

Cross-joint connector 45° / 135°, 2-shell

Close-up of a metallic tube connector joining three cylindrical tubes at 45° and 135° angles with hex screws, smooth matte finish
Bestell-Nr.: RV-2346a Request

Cross-joint connector, 1-shell

Bestell-Nr.: RV-1924e Request

Cross-joint connector, 2-shell

Technical line drawing of a dual-shell cross-joint tube connector with three views and precise measurements
Bestell-Nr.: RV-2421 Request

Double clamp, 2-shell

Technical drawing showing three views of a double clamp with two circular openings and detailed dimensions in millimeters
Bestell-Nr.: RV-1681d Request

Double-glass holder, 2 shell

Metallic double glass holder with two clamps and screws on a plain background
Technical drawing showing front, top, and side views of a double glass holder with dimensions in millimeters.
Bestell-Nr.: RV-1696 Request

End prop, 1-shell

Bestell-Nr.: RV-2390a Request

End prop, 1-shell

Technical drawing of single-layer end support tube connector with three views and detailed measurements showing dimensions and internal structure.
Bestell-Nr.: RV-2400a Request

Glass holder, 2-shell

Bestell-Nr.: RV-1681 Request

Glass holder, 2-shell

Two-part metal glass holder with circular clamp and U-shaped fork with hexagonal screw
Bestell-Nr.: RV-1692a Request

Ground bearing, 1-shell

Single-ring metal floor bearing with a circular base and three mounting holes, featuring a central cylindrical holder with a slit and tightening screw
Bestell-Nr.: RV-1709b Request

Ground bearing, 1-shell

A single-piece metal ground bearing unit with a cylindrical body attached to a circular base plate with four screw holes.
Bestell-Nr.: RV-1710a Request

Ground bearing, 1-shell

Single-tier floor bearing tube connector with circular base and four mounting holes
Technical drawing with dimensions of a one-piece floor bearing showing side, front, and top views with diameters and heights marked.
Bestell-Nr.: RV-1710b Request

Ground bearing, 2-shell

Bestell-Nr.: RV-2450a Request

Ground bearing, 1-shell

Bestell-Nr.: RV-2460a Request

Swivel bearing 35 x 35 option of 90° or 180°

Metal tube connector with hinge mechanism for 35 x 35 mm tubes, allowing a pivot of 90° or 180°, shown on neutral background
Technical drawing showing dimensions and views of a pendulum bearing tube connector for 35x35 mm tubes, indicating 90° and 180° rotation options
Bestell-Nr.: RV-2230 Request

T-connector, 2-shell

Gray T-shaped tube connector with two horizontal and one vertical openings and three screws
Technical drawing showing front, top, and side views of a two-layer T-shaped tube connector with dimensions in millimeters
Bestell-Nr.: RV-1889a Request

T-connector, 2-shell

Technical blueprint of a T-connector with two layers, showing three views with detailed measurements including circular openings of 35mm diameter and overall dimensions.
Bestell-Nr.: RV-2310a Request

T-connector, 2-shell

Metallic T-shaped tube connector with three screws and two layers
Dimensioned technical drawing of a two-layer T-shaped tube connector showing three views with specified measurements
Bestell-Nr.: RV-2320a Request

T-connector 45° / 135°, 2-shell

Bestell-Nr.: RV-2347a Request

T-joint connector, 1-shell

Bestell-Nr.: RV-1924d Request

T-joint connector, 2-shell

Bestell-Nr.: RV-2420 Request

Wall bearing- corner fastening, 1-shell

Silver metal corner bracket with two flat mounting plates and a cylindrical tube-sleeve at the right-angle joint
Technical line drawing showing three views of a single-layer wall mount corner bracket, labeled with dimensions including diameter 35 mm for tube fitting and 9 mm mounting holes.
Bestell-Nr.: RV-1713a Request

Wall bearing, 1-shell

Technical schematic of a single-shell wall bearing tube connector with dimensions and three different orthogonal projection views
Bestell-Nr.: RV-1864a Request

Wall bearing, 1-shell

Technical drawing showing front, side, and top views of a single-shell wall mount tube connector with detailed measurements in millimeters.
Bestell-Nr.: RV-2350a Request

Wall bearing, 1-shell

Single-shelled metal wall bracket for tube connectors with cylindrical clamp and four mounting holes
Bestell-Nr.: RV-2360a Request

Contact us

Rohde AG

Industriestrasse 9
D - 37176 Nörten-Hardenberg

Tel.: +49 (0) 5503 9860-0
Fax: +49 (0) 5503 9860-11

info@rohde-technics.com

 

Opening hours (CET)
Mon. - Thur. 07.15 - 15.45
Fri. 07.15 - 15.30