Handles PG
Handle for mounting from behind on edges with a material thickness from 1.5 mm to max. 5.0 mm.
Material and surface:
Handle profile of aluminium AlMgSi 0.5; glass ball blasted and half-matt anodized in natural or black colour. Profile end caps of polyamide PA 6, black with fine structure.
Structural features:
An individual arrangement of the retaining screws in the profile grooves is made possible by means of the two continous grooves (offset by 90°) in the handle profile.
Scope of delivery:
4 x SPAX (dry wall) srews; 4.0 x 16 mushroom-headed with cross (Phillips) slot.
Note:
Any other handle lengths and surfaces available on request.
Stress resistance:
min. 400 N.
|
Unit of measure
|
||
|---|---|---|
| Anodizing version | ||
| L |
Anodizing version natural-colored with satin finish
Order-No. |
Anodized aluminum black with satin finish
Order-No. |
| L |
Anodizing version natural-colored with satin finish
Order-No. |
Anodized aluminum black with satin finish
Order-No. |
|---|---|---|
| L 200 |
Anodizing version natural-colored with satin finish
Order-No. PG-01.200.11 3D+CAD |
Anodized aluminum black with satin finish
Order-No. PG-01.200.14 3D+CAD |
| L 400 |
Anodizing version natural-colored with satin finish
Order-No. PG-01.400.11 3D+CAD |
Anodized aluminum black with satin finish
Order-No. PG-01.400.14 3D+CAD |
| L 600 |
Anodizing version natural-colored with satin finish
Order-No. PG-01.600.11 3D+CAD |
Anodized aluminum black with satin finish
Order-No. PG-01.600.14 3D+CAD |
| L 1006* |
Anodizing version natural-colored with satin finish
Order-No. PG-01.001.11 |
Anodized aluminum black with satin finish
Order-No. PG-01.001.14 |
* Handle will unmounted with 2 end caps and with 6 SPAX – (dry wall) screws 4.0x16 mushroom-headed with cross slot (Phillips) delievered.
Contact us
Rohde AG
Industriestrasse 9
D - 37176 Nörten-Hardenberg
Tel.: +49 (0) 5503 9860-0
Fax: +49 (0) 5503 9860-11
info@rohde-technics.com